C3F2C-W
Product Features
- Industry-First IP65 Combined Socket: The first waterproof XLR input-output combined socket on the market, rated IP65 for full outdoor protection.
- Built for Outdoor DMX Lighting: Purpose-designed to meet the fast, weatherproof signal connection demands of outdoor DMX lighting rigs.
- Daisy-Chain Ready: Combined I/O layout supports easy pass-through wiring for multi-fixture lighting setups.
- Premium Materials: Zinc alloy die-cast housing with pearl chrome plating and gold-plated contacts for durability, corrosion resistance, and reliable conductivity.
- Double-Sealed Waterproofing: Rear air-proof treatment plus a rubber waterproof cover deliver two layers of protection against moisture and dust.
- Industry-Standard Compliance: Certified to IEC 61076-2-103 and IEC 68-2-20 standards for connector performance and solderability.
Contact us
Details
| Electrical parameters | |
| Capacitance between contacts | ≤ 4 pF |
| Contact resistance | ≤ 5 mΩ |
| Dielectric strength | 1500V DC |
| Insulation resistance | > 10 GΩ (initial) |
| Rated current per contact | 16 A |
| Rated voltage | < 50 V |
| Mechanical Parameters | |
| Insertion force | ≤ 20 N |
| Withdrawal force | ≤ 20 N |
| Service life | > 1000 mating cycles |
| Material and Environmental Parameters | |
| Contacts | Cu alloy |
| Contact plating | Au |
| Insert | PA |
| Housing | Zinc alloy |
| Housing plating | Cr |
| Flame-retardant grade | UL 94 HB |
| Protection class | IP65 |
| Temperature range | -30°C ~ +80°C |
| Standards and Certifications | |
| Standards | IEC 61076-2-103 |
| Solderability | IEC 68-2-20 |
Downloads
Description
The C3F2C-W is an IP65-rated waterproof XLR socket from Seetronic, purpose-built for outdoor DMX lighting and professional audio applications. As the industry’s first waterproof XLR input-output combined socket, it integrates both signal input and output into a single compact housing, making it ideal for daisy-chained (through) connections in touring and installed lighting rigs. The 3-pin combined socket features a zinc alloy housing with pearl chrome plating and gold-plated contacts, delivering a rugged, corrosion-resistant connector that takes up less panel space than separate sockets while maintaining full reliability.
Key Features
- IP65 Waterproof Rating: Industry-first combined XLR input-output socket rated IP65 for full protection against dust and water jets.
- Combined I/O Design: Integrates signal input and output in one socket, ideal for daisy-chaining (pass-through) in lighting and audio setups.
- Compact Footprint: Combined socket layout saves panel space compared to two separate connectors, without compromising strength.
- Sealed Rubber Cover: Rubber waterproof cover adds dust- and water-proof protection at the mating interface.
- Outdoor DMX Ready: Purpose-built to meet the fast, reliable signal connection demands of outdoor DMX lighting installations.
Electrical & Mechanical Specifications
- Contact Capacitance: ≤ 4 pF between contacts.
- Contact Resistance: ≤ 5 mΩ for low-loss signal transfer.
- Dielectric Strength: Withstands 1500V DC.
- Insertion/Withdrawal Force: ≤ 20 N for smooth, easy mating and unmating.
- Service Life: Rated for over 1,000 mating cycles.
Material and Environmental Specifications
- Contacts: Copper alloy with gold plating for durability and conductivity.
- Insert: PA (nylon) for reliable insulation and structural support.
- Housing Plating: Pearl chrome finish for corrosion resistance and aesthetics.
- Operating Temperature: Rated for -30°C to +80°C, suitable for extreme outdoor conditions.
- Compliance Standards: Conforms to IEC 61076-2-103 connector standard and IEC 68-2-20 solderability standard.
Packaging and Accessories
- Waterproof Gasket Included: Each unit ships with a waterproof gasket for sealed installation.
- Blister Box Packaging: Packed 9 pieces per blister box for protective, retail-ready packaging.
- Carton Configuration: 36 pcs per inner carton, 5 inner cartons per master carton (180 pcs per master carton).
- Optional Accessories: Back fastener plate, screws and nuts available depending on installation needs.
Assembly Instructions
- Fit the Waterproof Cover: Attach the waterproof cover to the rear side of the socket before installation.
- Front-Panel Mounting: Insert the socket into the panel cut-out from the front side of the enclosure.
- Secure with M3 Screws: Tighten the mounting screws clockwise to a torque of 0.5 Nm to ensure a secure, sealed fit.
- Panel Cut-Out Reference: Use the specified panel cut-out dimensions (44.00 × 24.00 mm, per datasheet drawing) for accurate installation.
