MP2RX-G
Product Features
- Space-Saving Right-Angle Design: Slim profile fits neatly into tight cable routing spaces where straight plugs can’t.
- Gold-Plated Contact: Delivers stable, low-resistance signal transmission with strong resistance to oxidation over time.
- Rugged Zinc Alloy Housing: Die-cast construction withstands heavy daily use in touring, studio, and live-sound environments.
- Secure Chuck-Style Clamp Sleeve: Locks the cable firmly in place, reducing strain and preventing accidental disconnects.
- Polished Chrome Finish: Combines a premium look with durable, corrosion-resistant surface protection.
Contact us
Details
| Product Parameters | |
| Connection type | Plug |
| Gender | Male |
| Electrical Parameters | |
| Rated Current | subject on mating connector |
| Rated Voltage | < 50 V |
| Contact Resistance | subject on mating connector |
| Dielectric Strength | 1000 V DC |
| Insulation Resistance | > 2 GΩ |
| Mechanical Parameters | |
| Service Life | > 1000 mating cycles |
| Cable Size | 1 mm² |
| 18 AWG | |
| Cable OD | 4-7 mm |
| Material and Environmental Parameters | |
| Housing | Zinc alloy |
| Contacts | Brass |
| Contact surface | Au |
| Housing plating | Cr |
| Temperature range | -20°C ~ +65°C |
| Standards and Certifications | |
| Solderability | IEC 68-2-20 |
| Certifications | IEC 60603-11/EIA RS-453 |
Downloads
Description
The MP2RX-G is a 1/4″ mono right-angle plug engineered for compact, reliable cable termination in professional audio applications. Its slim, ergonomic housing is die-cast for durability while remaining easy to handle in tight spaces, such as behind pedalboards, mixers, or instrument jacks where a low-profile connector is essential. The plug features a chrome-plated housing paired with a gold-plated contact, giving it both a polished appearance and dependable signal integrity. A chuck-style clamp sleeve secures the cable firmly in place, accommodating cable outer diameters from 4 to 7 mm. Rated for use up to 1000 mating cycles, the MP2RX-G is built to withstand repeated connect/disconnect cycles in demanding studio, stage, or field environments.
Key Features
- Right-Angle Slim Design: A space-saving 1/4″ mono right-angle plug ideal for tight cable routing and low-clearance connections.
- Gold-Plated Contact: Ensures excellent conductivity and long-term resistance to oxidation for stable signal transmission.
- Chrome-Plated Housing: Fine surface treatment delivers a durable, corrosion-resistant, and visually refined finish.
- Die-Cast Construction: A sturdy zinc alloy housing guarantees long-term mechanical durability.
- Chuck-Style Clamp Sleeve: Provides secure, reliable cable retention and strain relief.
- Polished Ergonomic Housing: Designed for maximum ease of operation during installation and use.
- Broad Cable Compatibility: Accepts cable outer diameters of 4–7 mm and conductor sizes up to 1.0 mm² / 18 AWG.
Material and Environmental Specifications
- Housing Material: Zinc alloy for a strong, impact-resistant shell.
- Contact Material: Brass base for consistent conductivity and mechanical strength.
- Contact Plating: Gold (Au) surface finish for enhanced corrosion resistance and signal reliability.
- Housing Plating: Chrome (Cr) plating for a durable, polished exterior finish.
- Certifications: Compliant with IEC 60603-11 / EIA RS-453 standards.
- Solderability: Tested to IEC 68-2-20 for dependable solder-joint quality.
Packaging and Accessories
- Individual Bagging: Each unit is packaged 1 pc per bag, complete with insert, housing, top cover, transparent insulation tube, and boot.
- Carton Packaging: 100 pcs per inner carton, with 5 inner cartons per master carton (500 pcs per master carton), suited for bulk ordering and distribution.
- No Additional Accessories Required: Ships as a complete, ready-to-assemble unit with no separate fasteners needed.
Assembly Instructions
- Cable Preparation: Thread the cable through the boot, housing, and insulation tube, then strip the cable to the specified dimensions.
- Conductor Termination: Solder the cable conductors to the insert and secure the cable with the clipboard-style cable clamp.
- Insulation and Cover Assembly: Slide the insulation tube over the cable and snap the top cover onto the assembled insert.
- Final Assembly: Tighten the housing clockwise onto the assembled inner core, then tighten the boot clockwise onto the housing to complete assembly.
