MP2X
Product Features
- Space-Saving Slim Design: Particularly slender 1/4″ profile allows for the highest density of packaging on multi-connector panels, ideal for compact equipment layouts.
- Industrial-Grade Durability: Rugged zinc die-cast housing with a novel structural design withstands demanding use and repeated handling.
- Secure Cable Retention: Chuck-jacket style cable clamp ensures reliable cable maintenance, reducing strain and preventing accidental disconnection.
- Effortless Handling: Polished, chrome-plated finish delivers a smooth grip and maximum operational convenience during installation and use.
- Proven Long-Term Reliability: Rated for over 1,000 mating cycles, ensuring consistent, long-lasting performance across repeated connect/disconnect use.
Contact us
Details
| Product Parameters | |
| Connection type | Plug |
| Gender | Male |
| Electrical Parameters | |
| Rated Current | depends on mating connector |
| Rated Voltage | < 50 V |
| Contact Resistance | depends on mating connector |
| Dielectric Strength | 1000 V DC |
| Insulation Resistance | > 2 GΩ |
| Mechanical Parameters | |
| Service Life | > 1000 mating cycles |
| Cable Size | 1 mm² |
| 18 AWG | |
| Cable OD | 4-7 mm |
| Material and Environmental Parameters | |
| Housing | Zinc diecast |
| Contacts | Brass |
| Contact surface | Ni |
| Housing plating | Cr |
| Temperature range | -20°C ~ +65°C |
| Standards and Certifications | |
| Solderability | IEC 68-2-20 |
| Certifications | IEC 60603-11/EIA RS-453 |
Downloads
Description
The MP2X is a slender 1/4″ (6.30mm) plug connector engineered for high-density cable assembly applications. Built with a strong die-cast zinc alloy housing and a chuck-style cable clamp, it offers dependable mechanical retention alongside a polished chrome finish for smooth, comfortable handling. Compatible with 18AWG (1.0mm²) cable in the 4-7mm OD range, the MP2X is rated for over 1,000 mating cycles and suited for a wide range of low-voltage signal and audio connection applications.
Key Features
- Slim Profile Design: Particularly slender 1/4″ form factor enables the highest packaging density on multi-connector panels and assemblies.
- Rugged Die-Cast Housing: Strong zinc die-cast shell construction with a novel design for durability and long service life.
- Reliable Cable Retention: Chuck-jacket style cable clamp firmly secures the cable and prevents strain on internal connections.
- Polished Finish: Chrome-plated exterior provides a smooth surface for maximum operational convenience and ease of handling.
- Long Service Life: Rated for more than 1,000 mating cycles, ensuring consistent performance over repeated use.
Material and Environmental Specifications
- Housing Material: Zinc die-cast construction for structural strength and durability.
- Contact Material: Brass contacts with nickel plating for reliable conductivity.
- Shell Electroplating: Chrome-plated exterior for corrosion resistance and a premium finish.
- Operating Temperature Range: Rated from -20°C to +65°C, suitable for a broad range of environments.
- Certified Standards: Compliant with IEC 68-2-20 solderability standards and IEC 60603-11 / EIA RS-453 certification.
Packaging and Accessories
- Individual Packaging: Each unit is bagged individually with a complete set of components — 1 inner core assembly, 1 shell, 1 cable clamp, and 1 tail sleeve.
- Bulk Packaging: Packed 100 pieces per box, with 5 boxes per carton (500 pieces per carton), suitable for volume orders.
- No Additional Accessories Required: The MP2X ships as a complete, ready-to-assemble unit with no extra hardware needed.
Assembly Instructions
- Cable Preparation: Thread the cable through the bushing, then strip the cable end to the specified dimensions before assembly.
- Soldering: Solder the conductor portion of the cable to the core assembly, keeping the shielding layer and signal wire properly separated.
- Core Installation: Push the inner core assembly into the housing, aligning the convex bar on the core with the corresponding bar on the housing.
- Final Tightening: Tighten the tail sleeve clockwise to complete assembly and secure all components.
- Cable Diameter Adjustment: For cables sized 4-5.5mm, the clamp tail remains intact; for cables sized 5.5-7mm, a portion of the clamp tail must be broken off prior to assembly.
