MP2RX-BG
Product Features
- Superior Signal Integrity: Gold-plated brass contacts minimize signal loss and resist oxidation over time
- Secure, Tangle-Free Connection: Chuck-style clamp sleeve locks cables firmly in place, reducing strain and accidental disconnects
- Wide Cable Compatibility: Accommodates 4-7mm cable OD and 18 AWG wire, fitting a broad range of audio cable types
- All-Weather Reliability: Operates reliably across a -20°C to +65°C temperature range, suitable for touring, live sound, and studio use
- Effortless Handling: Polished housing finish provides a comfortable, non-slip grip during installation and daily use
- Industry-Standard Compliance: Certified to IEC 60603-11/EIA RS-453, ensuring compatibility and quality assurance
Contact us
Details
| Product Parameters | |
| Connection type | Plug |
| Gender | Male |
| Electrical Parameters | |
| Rated Current | subject on mating connector |
| Rated Voltage | < 50 V |
| Contact Resistance | subject on mating connector |
| Dielectric Strength | 1000 V DC |
| Insulation Resistance | > 2 GΩ |
| Mechanical Parameters | |
| Service Life | > 1000 mating cycles |
| Cable Size | 1 mm² |
| 18 AWG | |
| Cable OD | 4-7 mm |
| Material and Environmental Parameters | |
| Housing | Zinc alloy |
| Contacts | Brass |
| Contact surface | Au |
| Housing plating | Black plating |
| Temperature range | -20°C ~ +65°C |
| Standards and Certifications | |
| Solderability | IEC 68-2-20 |
| Certifications | IEC 60603-11/EIA RS-453 |
Downloads
Description
The MP2RX-BG is a 1/4″ mono right-angle plug engineered for professional audio applications requiring a slim, low-profile connector. Featuring a black-plated die-cast zinc alloy housing and gold-plated brass contacts, this plug delivers reliable signal transmission with a rated voltage under 50V and insulation resistance exceeding 2 GΩ. Its chuck-style clamp sleeve ensures secure cable retention for cables with an outer diameter of 4-7mm, while the polished housing design allows for easy handling during installation. Built to withstand over 1,000 mating cycles, the MP2RX-BG is a durable, high-quality solution for audio equipment manufacturers and cable assembly applications.
Key Features
- Right-Angle Slim Design: Compact 1/4″ mono right-angle profile ideal for space-constrained installations
- Dual-Plated Construction: Black-plated housing paired with gold-plated contacts for corrosion resistance and enhanced conductivity
- Die-Cast Durability: Sturdy zinc alloy die-cast housing ensures long-term structural integrity
- Secure Cable Retention: Chuck-style clamp sleeve design firmly grips cables to prevent slippage or strain
- Ergonomic Finish: Polished housing surface allows for smooth, comfortable handling during assembly and use
- Long Service Life: Rated for over 1,000 mating cycles, supporting extended product lifespan
Material and Environmental Specifications
- Housing Material: Zinc alloy for structural strength and durability
- Contact Material: Brass with gold (Au) surface plating for optimal conductivity
- Housing Finish: Black plating for a sleek, professional appearance
- Operating Temperature: Rated for use between -20°C and +65°C, suitable for varied environments
- Dielectric Strength: Rated at 1000V DC for reliable electrical insulation
- Certifications: Compliant with IEC 60603-11/EIA RS-453 standards and IEC 68-2-20 solderability standard
Packaging and Accessories
- Individual Packaging: Each unit packed 1 pc per bag, including insert, housing, top cover, insulation tube, and boot
- Bulk Packaging: 100 pcs per inner carton, 5 inner cartons per master carton (500 pcs per master carton)
- No Additional Accessories Required: Ships complete and ready for assembly without extra mounting hardware
Assembly Instructions
- Cable Preparation: Thread the cable through the boot, housing, and insulation tube, then strip the cable to the specified dimensions (16mm total, exposing 6mm shielding and 4mm conductor)
- Soldering: Solder the cable conductor to the insert component and secure the shielding layer with the built-in clip
- Component Assembly: Slide the insulation tube over the cable and snap the top cover into the assembled insert
- Final Tightening: Tighten the housing clockwise onto the insert assembly, then tighten the boot clockwise onto the housing to complete assembly
