MP2RX
Product Features
- Slim Right-Angle Profile: Compact 1/4″ mono plug design minimizes cable strain and fits into tight, space-constrained installations.
- Premium Chrome Finish: Fine-finished, chrome-plated housing delivers a polished, professional look that holds up over time.
- Corrosion-Resistant Contacts: Nickel-plated brass contacts ensure stable signal transfer and long-term reliability.
- Rugged Die-Cast Build: Zinc alloy housing withstands daily wear and tear in touring, studio, or install environments.
- Secure Cable Retention: Chuck-style clamp sleeve locks the cable in place, preventing slippage or accidental disconnects.
- Proven Durability: Rated for 1,000+ mating cycles, backed by 1000V DC dielectric strength and >2 GΩ insulation resistance.
Contact us
Details
| Product Parameters | |
| Connection type | Plug |
| Gender | Male |
| Electrical Parameters | |
| Rated Current | subject on mating connector |
| Rated Voltage | < 50 V |
| Contact Resistance | subject on mating connector |
| Dielectric Strength | 1000 V DC |
| Insulation Resistance | > 2 GΩ |
| Mechanical Parameters | |
| Service Life | > 1000 mating cycles |
| Cable Size | 1 mm² |
| 18 AWG | |
| Cable OD | 4-7 mm |
| Material and Environmental Parameters | |
| Housing | Zinc alloy |
| Contacts | Brass |
| Contact surface | Ni |
| Housing plating | Cr |
| Temperature range | -20°C ~ +65°C |
| Standards and Certifications | |
| Solderability | IEC 68-2-20 |
| Certifications | IEC 60603-11/EIA RS-453 |
Downloads
Description
The MP2RX is a slim, mono 1/4″ right-angle plug engineered for reliable, long-term performance in professional audio applications. Built on a sturdy die-cast zinc alloy housing with a chrome-plated finish and nickel-plated brass contacts, the MP2RX combines a compact right-angle profile with a chuck-style clamp sleeve for secure cable retention. Its polished housing design makes cable termination and field assembly straightforward, while its low-profile form factor is ideal for tight cable runs and space-constrained installations. Rated for use up to 50V DC and tested for more than 1,000 mating cycles, the MP2RX is built to withstand repeated use in demanding environments.
Key Features
- Slim Right-Angle Design: A low-profile 1/4″ mono right-angle plug that reduces strain on cables and fits neatly into tight spaces.
- Chrome-Plated Housing: A precision, fine-finished chrome exterior delivers a durable, professional appearance.
- Nickel-Plated Contacts: Ensures stable signal transfer and long-term corrosion resistance.
- Die-Cast Construction: A sturdy zinc alloy housing provides excellent durability under repeated use.
- Chuck-Style Clamp Sleeve: Delivers secure, reliable cable retention and strain relief.
- Easy-Grip Housing: A polished, ergonomic design allows for smooth handling during installation and removal.
- Broad Cable Compatibility: Accommodates cable outer diameters from 4-7mm.
Material and Environmental Specifications
- Housing Material: Constructed from zinc alloy for structural strength and durability.
- Contact Material: Brass contacts with a nickel surface finish for consistent conductivity.
- Housing Plating: Chrome-plated exterior for a refined, corrosion-resistant finish.
- Operating Temperature Range: Performs reliably between -20°C and +65°C.
- Certified Standards: Solderability tested to IEC 68-2-20; certified to IEC 60603-11 / EIA RS-453.
Packaging and Accessories
- Individual Bagging: Each unit is packaged individually, complete with insert, housing, top cover, transparent insulation tube, and boot.
- Carton Configuration: Packed 100 pieces per inner carton and 5 inner cartons per master carton, for 500 pieces per master carton.
- No Additional Accessories Required: Ships complete and ready for cable termination, with no extra hardware needed.
Assembly Instructions
- Prepare the Cable: Thread the cable through the boot, housing, and insulation tube before stripping.
- Strip to Spec: Strip the cable to the dimensions specified in the datasheet, exposing the shielding layer and signal wire.
- Solder and Secure: Solder the conductor to the insert and secure the cable using the built-in clipboard-style cable clamp.
- Insulate and Cap: Slide the insulation tube over the cable and snap the top cover onto the assembled insert.
- Final Assembly: Tighten the housing clockwise onto the insert component, then tighten the boot clockwise onto the housing to complete assembly.
